Complete guide for installation and maintenance of agricultural irrigation hoses

2025-11-04 08:53:25

Installation steps

Planning layout: Design the spacing between branch pipes based on crop row spacing (for example, tomato planting should use a spacing of 0.5 meters).

Laying technique: The water hose should be laid flat and avoid twisting. A certain cooperative caused 30% of the drip heads to be blocked due to improper installation.

System flushing: The new water hose needs to be flushed for 30 minutes to remove impurities before use.

Common fault handling

Leakage: Use specialized repair tape or hot melt adhesive to handle it.

Blockage: Rinse with 0.1% dilute hydrochloric acid, and replace the dropper in severe cases.

Frost crack protection: Drain and store water in winter, roll up and store in a cool place.

maintenance cycle

It is recommended to check the pressure balance once a month and clean the filter quarterly. A farm in Hebei has extended the lifespan of its water hose system from 2 years to 4 years through regular maintenance.